T400休眠后无法唤醒的解决方法

View Post

T400休眠后无法唤醒的解决方法

症状：安装vista进入休眠或者待机，希望唤醒时仅听到“滴”的一声，但是屏幕还是黑的，简单的说就是“系统醒不过来” （好像XP也有类似问题）
网上查到过的解决方法（基本都不靠谱）
1.打开TPM （号称是打联想800问来的，国外很多论坛也有这么说的，但是部分朋友的情况是可以通过此方法解决）
2.关闭AMT（最不靠谱的说法）
3.装官方电源管理驱动（这个当然要装，还用说）
下面来说说具体问题
ThinkPad在BIOS里有SATA模式的设置ACHI和兼容模式，而之前的习惯是为了正常安装XP，必须设置为兼容模式，所以很多机器从买来的时候，BIOS设置就设置在兼容模式下（尤其是最近的T400，由于没有SLIC，不能用装OEM vista）
因此我们买来之后如果是装vista的时候又没有调整SATA设置，那我们的硬盘其实是在模拟ATA模式工作，最终就导致休眠无法唤醒。（类似设置在之前的6系列机型就没有问题，但是现在现在机型如T400/T500/W500等机型好像都存在）
但问题有又来了，如果已经安装完成vista，再去BIOS中调整为ACHI，结果就是开机蓝屏.....
解决方法：
1.修改注册表项 HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci 改Start为0
2.重新启动，进入BIOS修改SATA模式至ACHI
3.进入vista，更新SATA驱动（Intel Matrix Storage Manager Driver http://www-307.ibm.com/pc/suppor ... ?lndocid=MIGR-70477）
4.之后系统可能需要重新启动2次（硬盘和光驱的驱动都会重新安装）
5.再尝试休眠，就一切OK了

posted on 2009-04-23 22:52 David 阅读(1567) 评论(2) 编辑收藏引用所属分类: Windows系统

View Comments

# re: T400休眠后无法唤醒的解决方法回复 更多评论

联想地址是：http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70477

2009-04-23 22:58 | David

# re: T400休眠后无法唤醒的解决方法 回复 更多评论

Installation instructions
Clean install
Windows Vista 32-bit

1. Start Windows Vista and logon with administrative privileges.
2. Click Start, then click Control Panel.
3. Click System and Maintenance, then click System.
4. Click Device Manager.
5. Expand the IDE ATA/ATAPI controllers category.\
6. Right-click Intel ICH8M SATA AHCI Controller or
Intel 82801HEM/HBM SATA AHCI Controller or
Intel 82801GBM SATA AHCI Controller or
Intel(R) ICH9M-E/M SATA AHCI Controller or
Intel(R) ICH9M/M-E Family 4 Port SATA AHCI Controller - 2929 or
RAID Controller
Standard AHCI 1.0 Serial ATA Controller
and then select Update Driver Software...

1. Click Browse my computer for driver software.
2. Click Browse..., then select the driver location and then click
Next.
3. Click Close when the installation has completed.
4. Click Yes to restart the computer.

Windows XP
Note: Be sure to install Intel Matrix Storage Manager Driver before installing the operating system. Otherwise your computer will not respond; it will only display a blue screen.

1. Attach a diskette drive to your computer.
2. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\IMSM and copy the driver to a diskette.
3. To make sure that SATA AHCI is enabled, start the BIOS Setup Utility menu.
4. Select Config.
5. Select Serial ATA (SATA).
6. Select AHCI or RAID*.
*Applicable only in ThinkPad W700.
7. Change the startup sequence of your computer. Following the instructions on the Startup menu in the BIOS Setup Utility, set the CD-ROM drive to start first.
8. Insert the CD for Windows XP into the CD or DVD drive, and restart the computer.
9. To install a third-party SCSI or RAID driver first, press F6.
10. When prompted, select S for Specify Additional Device.
11. When prompted, insert the diskette that you created in step 2, and press Enter.
12. If your system has Intel 82801HEM/HBM SATA AHCI Controller, select Intel 82801HEM/HBM SATA AHCI Controller (Mobile ICH8M-E/M), and press Enter.
If your system has Intel 82801GBM SATA AHCI Controller, select Intel 82801GBM SATA AHCI Controller (Mobile ICH7M/DH), and press Enter.
If your system has Intel(R) ICH9M-E/M SATA AHCI Controller, select Intel(R) ICH9M-E/M SATA AHCI Controller, and press Enter.
If you selected RAID mode in ThinkPand W700, select Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller.
* Note: If you do not see your controller listed, use the arrow keys to scroll through the complete list. This package contains drivers for several controllers that are not displayed by default.
13. To continue the installation, press Enter again. Leave the diskette in the drive until the next reboot; the software may need to be copied from the diskette again when the files are copied during setup.
14. Follow the instruction to complete the OS installation.

Note: If you do not have a diskette drive, you can install Intel Matrix Storage Manager Driver by the following alternative procedure:

If you do not have a diskette drive, you can install Intel Matrix Storage Manager Driver by the following alternative procedure:

1. Start the BIOS Setup Utility menu.
2. Select Config.
3. Select Serial ATA (SATA).
4. Select Compatibility.
5. Install Windows XP and Service Pack 2.
6. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\IMSM.
7. Run Intel Matrix Storage Manager Driver. To do this, go to C:\DRIVERS\WIN\IMSM\PREPARE, and double-click install.cmd.
8. Turn the computer off and then on again.
9. Start the BIOS Setup Utility menu.
10. Select Config.
11. Select Serial ATA (SATA).
12. Select AHCI.
13. Start Windows XP. The Welcome to the Found New Hardware Wizard appears.
14. Click No, not this time and click Next.
15. Select Install from a list or specific location(Advanced), then click Next.
16. Select Search for the best driver in these locations. Then select Include this location in the search:, specify the path, C:\DRIVERS\WIN\IMSM, and click Next. The Completing the Found New Hardware Wizard appears.
17. Click Finish.
18. When the System Settings Change window appears, click Yes. The computer restarts.

Update install

1. Start Windows XP.
2. Right-click My Computer and select Properties from the pop-up menu.
3. Click the Hardware tab and click Device Manager.
4. Click the + mark to expand IDE ATA/ATAPI controllers.
5. Right-click Intel 82801HEM/HBM SATA AHCI or Intel 82801GBM SATA AHCI Controller or Intel(R) ICH9M-E/M SATA AHCI Controller or Intel(R) ICH8M-E/ICH9M-E/M SATA RAID Controller and click Properties.
6. Click the Driver tab.
7. Click Update Driver.
8. If running Windows XP:
1. Select No, not this time and click Next.
2. Select Install from a list or specific location.
3. Click Next button.
4. Select Search for the best driver in these locations and Include this location in the search.
9. Click Browse.
10. Locate the driver folder and click OK.
11. Click Next. The driver installation starts.
12. Click Finish when the installation completes.
13. Click Close.

Determining which version is installed
To check the version of the device driver that is installed on your system, follow these instructions:

Windows Vista 32-bit

1. Right-click My Computer and click Properties.
2. Click the Hardware tab and click Device Manager.
3. Click the + sign in front of the IDE ATA/ATAPI controllers category.
4. Double-click Intel 82801 HEM/HBM SATA AHCI Controller or Intel 82801GBM SATA AHCI Controller or Intel(R) ICH9M-E/M SATA AHCI or Intel(R) ICH8M-E/ICH9M-E/M SATA RAID Controller.
5. Click the Driver tab, the driver version is displayed.

Windows XP

1. Right-click My Computer and click Properties.
2. Click the Hardware tab and click Device Manager.
3. Click the + sign in front of the IDE ATA/ATAPI controllers category.
4. Double-click Intel 82801 HEM/HBM SATA AHCI Controller or Intel 82801GBM SATA AHCI Controller or Intel(R) ICH9M-E/M SATA AHCI or Intel(R) ICH8M-E/ICH9M-E/M SATA RAID Controller.
5. Click the Driver tab, the driver version is displayed.

2009-04-23 22:58 | David

刷新评论列表

只有注册用户登录后才能发表评论。

SA Blog --系统管理员的博客生涯

常用链接

留言簿

随笔分类(395)

随笔档案(330)

收藏夹(5)

IT技术

健康

友情链接

存储技术

网络技术

搜索

最新评论

阅读排行榜

评论排行榜

View Post