ROS用流量监控控制限速的开关

蝴蝶の风 — Thu, 01 Feb 2007 13:29:00 GMT

先做好一个PCQ的限速
http://bbs.routerclub.com/viewthread.php?tid=5897

下边在开始进入正题
ROS的流量监控只能监控不同网卡的流量收发
假如wan口的带宽是10M我们在9M的时候开启控制条件.
/tool traffic-monitor
add name=pcqon interface=WAN on-event=pcqon threshold=9000000 trigger=above traffic=received

/system script add name="pcqon" source="/queue tree enable queue1 " owner="admin" policy=reboot,read,write,policy,test
在带宽使用低于7M时关闭流量控制
/tool traffic-monitor
add name=pcqoff interface=WAN on-event=pcqoff threshold=7000000 trigger=below traffic=received

/system script add name="pcqoff" source="/queue tree disable queue1 " owner="admin" policy=reboot,read,write,policy,test

screen.width*0.7) {this.resized=true; this.width=screen.width*0.7; this.alt='点击在新窗口查看全图\nCTRL+鼠标滚轮放大或缩小';}" border="0" />

蝴蝶の风 2007-02-01 21:29 发表评论

DeepFreeze 冰点还原企业网络版无限版生成器教程

蝴蝶の风 — Sun, 24 Dec 2006 06:11:00 GMT

screen.width-500)this.style.width=screen.width-500; }" border="0" /> 转贴请注明来自 Max工作室 http://pzz.cn

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />
screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />
screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />
screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

screen.width-500)this.style.width=screen.width-500; }" border="0" />

以下为DF客户端使用教程.

客户端直接双击安装.也可能过写批处理来安装.参数为例:(DF的客户端文件名为:DF.EXE)

DF.EXE /INSTALL (安装) 转贴请注明来自 Max工作室 http://pzz.cn

DF.EXE /UNINSTALL (卸载注:要去掉保护后才能卸载)]

DF.EXE /PW=XXXXXXX (X为你的密码)

DF.EXE /FREEZE=C:,D:, (为只保护C和D盘)

当然你也可以同时使用一些参数,如安装时密码: max 保护 C.D.E盘三个盘,命令行如下:

DF.exe /install /pw=max /freeze=c:,d:,e:,

其它参数可用 DF.EXE /?来查看,不过以上的使用为基准版和官方发放版,如果为自定议版个别参数将不能使用.建议自己成生客户端,然后双击安装.当然如果你用生成的,你可以先生成种子,然后再到客户机里母盘上安装上种子,GHOST到所有机子完成后,最后直接在DF生成的控制端上直接安装下面有装种子的所有机器.一下可全部通过服务端安装搞定. 转贴请注明来自 Max工作室 http://pzz.cn

这里是安装后的使用教程.

安装后从起后DF自动进入保护状态.按 CTRL+ALT+SHIFT+F6 来激活进入客户端管理的控制菜单..键入CTRL+ALT+SHIFT+F6 会出现如下图:

screen.width-500)this.style.width=screen.width-500; }" border="0" />此主题相关图片如下：
screen.width-500)this.style.width=screen.width-500; }" border="0" /> 在这里输入你的密码,我生成的密码为: zhenfu 你生成的密码当然是你设的啦.

输入密码后出现如下图:

screen.width-500)this.style.width=screen.width-500; }" border="0" />此主题相关图片如下：
screen.width-500)this.style.width=screen.width-500; }" border="0" />

第一个选项: Boot Froze 为从起后保护即还原状态

第二个选项: Boot Thawed no Next (x) 这个选项从新起动后X为几次后进入保护状态

第三个选项: Boot Thawed 为从新启动计算机后进入不保护状态.(更新系统或游戏时选这个再从起就不保护了,可以更新了.更新完后再键入CTRL+ALT+SHIFT+F6 输入密码选择第一项,再从起后就进入保护状态了) ,在这里注意了.DF是没有像还原精灵有转存功能的,只有从起后进入保护和不保护状态.

关于卸载: 要卸载DF客户端的话,必须先去掉保护后(即第三项),从新启动后再次运行客户端安装程序就有卸载先项了.当然你也可以通过 DF.exe /uninstall 命令行来实再卸载!

蝴蝶の风 2006-12-24 14:11 发表评论

IT博客-￡蝴蝶の风￡の-随笔分类-个人文档

ROS用流量监控控制限速的开关

DeepFreeze 冰点还原企业网络版无限版生成器教程